HVAC Maintenance Services for Richmond and Surrounding Areas
Before big cooling or heating seasons, like summer and winter, it’s always a good idea to have your HVAC system checked out by one of our maintenance experts. Small problems can quickly become bigger problems as your furnace and AC works hard to keep you comfortable in the tougher seasons. Southern Goodman Mechanical offers preventive HVAC maintenance plans and service agreements for your convenience and year-round comfort.
Southern Goodman Mechanical’s three levels of HVAC maintenance plans:
Silver
(Add $7/month for each additional system)
$12.50/Month
- Reduced $99 service trip rate
- $40/year discount on future new system installs
- Electrical wiring – inspect and tighten connections
- Check controls of the system
- Test thermostat for proper operation, calibrate, and level
- Check central air conditioner’s refrigerant level
- Condensate drain – flush and treat with anti-algae
- Check all gas connections, gas pressures, burner combustion and heat exchanger
Gold
(Add $14/month for each additional system)
$22.50/Month
- 15% discount on repairs
- Discounted $49 service trip rate
- $50/year discount on future new system installs
- Measure amperage and voltage for proper blower motor operation
- Lubricate all moving parts per manufacturer
- Measure and adjust gas pressure for peak efficiency
- Inspect and clean outdoor coil
- Inspect and clean evaporator coil
- Inspect and clean condenser coil
- Inspect fan blades
- Inspect safety devices for proper operations
- Test safety and control circuits for proper operations
- Inspect electrical disconnect box for proper rating
- Test and inspect contactors for burned, pitted contacts
- Inspect and test capacitors
- Inspect service valves for proper operation
- Inspect compressor to monitor amperage and volt draw and wiring
- Inspect for combustible material around furnace
- Test ignition system for safe and proper operation
- Test exhaust system for proper venting
- Clean furnace exterior
- Hydroscan certification of heat exchanger for cracks and wear
- Clean and inspect combustion vents
- Check natural gas lines for leaks
- Inspect ductwork for energy loss
- PLUS Everything from Silver…
- Electrical wiring – inspect and tighten connections
- Check controls of the system
- Test thermostat for proper operation, calibrate, and level
- Check central air conditioner’s refrigerant level
- Condensate drain – flush and treat with anti-algae
- Check all gas connections, gas pressures, burner combustion and heat exchanger
Platinum
(Add $16 a month for each additional system)
$$31/Month
- 15% discount on repairs
- Complimentary service trips
- $100/year discount on future new system installs
- Leak check for one complete system per year
- Adding refrigerant (up to 3lbs of R410A or 1lb of R22 included)
- Clean and inspect heat exchangers
- Condensate drain pan protection treatment
- Adjust dampers
- Infrared camera inspection of furnace heat exchanger
- Biocide mold treatment for indoor air movement system
- Clean existing air filter (as needed only if washable)
- Measure supply and return temperature differential
- Inspect and adjust fan belt tension
- Clean and inspect furnace burner
- Air balance CFM
- PLUS Everything from Silver and Gold
- Measure amperage and voltage for proper blower motor operation
- Lubricate all moving parts per manufacturer
- Measure and adjust gas pressure for peak efficiency
- Inspect and clean outdoor coil
- Inspect and clean evaporator coil
- Inspect and clean condenser coil
- Inspect fan blades
- Inspect safety devices for proper operations
- Test safety and control circuits for proper operations
- Inspect electrical disconnect box for proper rating
- Test and inspect contactors for burned, pitted contacts
- Inspect and test capacitors
- Inspect service valves for proper operation
- Inspect compressor to monitor amperage and volt draw and wiring
- Inspect for combustible material around furnace
- Test ignition system for safe and proper operation
- Test exhaust system for proper venting
- Clean furnace exterior
- Hydroscan certification of heat exchanger for cracks and wear
- Clean and inspect combustion vents
- Check natural gas lines for leaks
- Inspect ductwork for energy loss
- Reduced $99 service trip rate
- $40/year discount on future new system installs
- Electrical wiring – inspect and tighten connections
- Check controls of the system
- Test thermostat for proper operation, calibrate, and level
- Check central air conditioner’s refrigerant level
- Condensate drain – flush and treat with anti-algae
- Check all gas connections, gas pressures, burner combustion and heat exchanger